| |
7-33. In which of the following ways should the MDS data
received from your ship be used?
1.
2.
3.
4.
To obtain the total maintenance cost and man-
hours expended
To obtain the total maintenance cost for each
system, subsystem, or component
To obtain information required to accurately
predict future usage
All of the above
7-34. What information do the source codes on MDS
documents submitted to your TYCOM provide?
1. Support activity effciency data
2. Supply storeroom support efficiency data
3. ICPs support efficiency data
4. TYCOM support efficiency data
Learning Objective: Identify the Storekeeper’s tasks in
relation to the Afloat Consumption and Cost Effectiveness
Surveillance System (ACCESS) program both in the
supply office and the storeroom.
7-35. The task(s) of the Afloat Consumption and Cost
Effectiveness Surveillance System (ACCESS)
program consists of which of the following
procedures?
1. Collecting and processing usage data and
preparing reports only
2. Reviewing and evaluating the effectiveness of the
supply support only
3. Recording the effectiveness of the ship
4. Making more efficient use of ship’s OPTAR
7-36. The Selected Item Management (SIM) Item
Identification Listing provides which of the following
data?
1. A listing of load list material issued from
storeroom stock
2. SIM consumption data and machine calculated
stocking limits
3. SIM consumption data and firm stocking limits
4. SIM consumption data only
7-37. What publication gives the criteria for determining
the type and quantity of material that can be
designated as preexpended bin material?
1. NAVSUP P-475
2. NAVSUP P-485
3. NAVSUP P-486
4. NAVSUP P-518
7-38.
7-39.
7-40.
When should an issue document be prepared for
preexpended bin material?
1. Each time material issued is used
2. When material is obtained from the supply
department
3. After each preexpended bin material inventory
4. Before reordering material for stock
Designating qualifying material in stock as
preexpended bin material accomplishes which of the
following goals?
1. Permits more realistic reporting only
2. Reduces volume of issue documents only
3. Reduces volume of issue documents permits more
realistic reporting
4. Simplifies stock replenishing procedures
The stock records Storekeeper sends the green copies
of issue documents to the maintenance office for ‘what
reason?
1. For verification of MDS data and filing
2. For verification of MDS data prior to forwarding
to the TYCOM
3. For review and return to the supply office for
filing
4. For review and forwarding to the engineering
department log room for tiling
Learning Objectives: Identify the various types of
materials-handling equipment: specify the uses of each
7-41. Which of the following pieces of materials-handling
equipment is equipped with telescopic masts that
permit loads to be lifted beyond the height of the
collapsed mast?
1.
2.
3.
4.
Warehouse tractor
Hydraulic lift handtruck
Forklift truck
Pallet truck
7-42. Forklift trucks are generally used at which of the
following locations?
1.
2.
3.
4.
Aboard ship, on barges, on piers, and in
warehouses
In freight terminals and on the ground to hoist
heavy containers
In yards with or without hard surfaces
All of the above
47
|
