| |
IN ANSWERING QUESTIONS 6-19 THROUGH
6-22, SELECT FROM COLUMN B THE PART OF
THE FLATWORK IRONER THAT IS USED FOR
THE PURPOSE INDICATED IN COLUMN A.
A.
PURPOSES
B.
PARTS
6-19.
6-20.
6-21.
6-22.
6-23.
6-24.
6-25.
Smooths and
1.
flattens the
flatwork
against the
2.
steam-heated
cylinder
3.
Catches all
finished
material
4.
Carries and
leads the flatwork
into the ironer
over the cylinder
Holds the flatwork
Feed
ribbons
Padded
rolls
Return
ribbons
Delivery
table
against the underside
of the heated cylinder
and passes it back to
the front
Which of the following parts of
the flatwork ironer prevent(s)
the hand of the operator from
getting near the padded
pressure rolls?
1.
The feed ribbons
2.
The finger guard
3.
The apron
4.
The removable cover
What control on the flatwork
ironer engages the compression
roll?
1.
The start button
2.
The drive roll
3.
The speed control lever
4.
The foot pedal
How often should you check the
safety finger guard on the
flatwork ironer to make sure it
is working properly?
1.
Every shift
2.
Twice weekly
3.
Monthly
4.
Quarterly
6-26.
6-27.
6-28.
What will happen if you touch
the safety finger guard on the
flatwork ironer while the
ironer is operating?
1.
The flatwork ironer will
adjust to the next lower
speed
2.
The compression roll will
disengage
3.
An alarm will alert the user
4.
The flatwork ironer will
stop
What action should you take if
some linen becomes jammed in
the flatwork ironer?
1.
Disengage the compression
roll and pull the linen out
2.
Put on a pair of safety
gloves, turn the speed
control lever in reverse,
and slowly pull the linen
Out
3.
Put on safety gloves and
try to remove the linen
while the flatwork ironer
is running in the fast
speed
4.
Shut the ironer off at the
power source, release the
compression rolls, allow
the ironer to cool, and
remove the jammed linen
When, if ever, may you operate
a flatwork ironer with a faulty
safety finger guard?
1.
When the workload is heavy
and you are behind schedule
2.
When there are two or more
persons present at the
flatwork ironer in case of
an emergency
3.
Only when a person is
standing by the emergency
stop button ready to cut
the power off
4.
Never
Learning Objective:
Identify
the procedures for operating
the flatwork ironer.
51
|
