| |
7-46.
The automatic pants topper is
used to finish which of the
following items?
1.
Trouser legs
2.
Shirts
3.
Peacoats
4.
Trouser tops
7-47.
The automatic pants topper uses
which of the following pressing
aids to press items?
1.
Water
2.
Air
3.
Steam
4.
Both 2 and 3 above
Learning Objective:
Determine
the general procedures for
maintaining equipment in the
dry-cleaning plant.
7-48.
To prevent the buildup of dust
and dirt on the dry-cleaning
machine, what maintenance
action should you take?
1.
Apply a light coat of wax
to the machine
2.
Use a synthetic soap when
washing the machine
3.
Apply a light coat of
silicone to the machine
4.
Use a safe solvent to wash
the machine
7-49.
How often should the foam
filter on the dry-cleaning
machine be cleaned?
1.
After each wash
2.
Daily
3.
Weekly
4.
Monthly
7-50.
What is the proper way to clean
the foam filter on the
dry-cleaning machine?
1.
Brush off the excess lint
on the foam material, wash
with an all-purpose
detergent, and squeeze dry
2.
Brush off the excess lint
from the foam material,
wash with clear water, and
squeeze dry
3.
Vacuum off all excess lint
and replace
4.
Vacuum off all excess lint,
wash with a cleaning
solvent, and squeeze dry
7-51.
How often should the pump lint
strainer be cleaned on the
dry-cleaning machine?
1.
Weekly
2.
Twice monthly
3.
Monthly
4.
Quarterly
7-52.
How many flannel pads should be
used to pad the dry-cleaning
press?
1.
One
2.
Two
3.
Three
4.
Four
Learning Objective:
Identify
the characteristics of spots
and stains, the job of the
spotter, and the tools used to
remove spots and stains.
7-53.
What is the difference between
a spot and a stain?
1.
A stain cannot be removed
without damage to the
fabric; a spot can
2.
A stain must be treated
before the clothing is
cleaned; a spot need not be
3.
A stain can be removed
without additional
treatment; a spot cannot
4.
A stain is the result of
dry cleaning before spot
treatment; a spot is the
result of food, blood,
grease, and so on
64
|
